HealthGoods

	Pre-Filters 3/16" thick, non woven polyester Activated Carbon impregnated pre-filters. Pre-filter recommended replacement is every 3-6 months. Can be vacuumed to lower replacement costs.
	Inner Filter Blankets 1/2" thick, non woven polyester Activated Carbon inner blankets. Inner blanket recommended replacement is every 6 months.
	HEPA Filter Cartridge Model 2500 - 8" tall, 50 square feet of true HEPA (High Efficiency Particulate Arresting) filter media. Model 3000 - 16" tall, 100 square feet of true HEPA (High Efficiency Particulate Arresting) filter media. Each finished filter is tested for the removal of 99.97% of all particulates down to 0.3 microns in size with a laser particle counter. Amaircare HEPA filters are made from borosilicate fibers, feature top and bottom seals and rigid construction. Recommended replacement period is 2-5 years.
	Annual Replacement Kit 3 - 3/16" thick, non woven polyester Activated Carbon impregnated pre-filters. 2 - 1/2" thick, non woven polyester Activated Carbon inner blankets.
	Gas and Odor Filter Kit  Model 2500 - 8" Drop-in cartridges featuring 8 lbs. of solid pelletized 100% Activated Carbon gas and odor adsorbing media. Model 3000 - 16" Drop-in cartridges featuring 12 lbs. of solid pelletized 100% Activated Carbon gas and odor adsorbing media.  Includes 3 pre-filters. Longer lasting odor and gas adsorption capability than carbon impregnated woven fabric filters. These drop-in odor and gas cartridges fit inside the HEPA filter and can be replaced independently of the HEPA filter allowing the user to change filters only when necessary for optimum odor removal and cost savings. Recommended filter replacement is 1 year or when gas and odor removal ability has noticeably diminished.

	Opening the Cabinet Turn the unit off and unplug it. Remove the child-proof access screw at the back near the top of the unit. Do not discard it as you will need it later. To remove the four buttons located around the top edge, press down on the top cover. At the same time, press against the perforated screen directly below a button. The button will pop out slightly. Pull the button out all the way. Repeat for all four buttons. Once all four buttons are out, remove the metal cover and lift off the rubber gasket.
	Pre-Filter Lift the complete filter cartridge assembly from the unit. Remove and discard the carbon pre-filter. Wrap the new pre-filter around the HEPA cartridge completely enclosing it. Peel off the adhesive strip backing and press the filter together to seal it. Put the filter cartridge back in the unit. HEPA Filter Remove and carefully discard the old HEPA cartridge. Insert a new HEPA cartridge, complete with new Pre-filter and Inner Blanket. Place a new O-ring seal in the outer groove in the top of the HEPA cartridge. If the O-ring appears too big, pinch it in several places until it fits in the groove.
	Inner Blanket Fold the ends of the old Inner Blanket in and remove it from the unit. Insert the new Inner Blanket inside the HEPA filter with the edges overlapped by at least one inch. Once it is in position, press the Inner Blanket tightly against the inner screen until the ends butt together. Optional Odor and V.O.C. Cartridge The V.O.C. Cartridge is used in place of the Inner Blanket. Carefully slide the V.O.C. Cartridge into the HEPA filter. Do not drop it as it is heavy and may damage the unit.
	Closing the Cabinet Replace the rubber gasket on top of the filter cartridge in the grooved area. Position the top cover on the unit with the child-proof access screw hole at the rear of the unit. Replace the buttons by applying firm pressure to the top cover to align the holes and insert the buttons. Replace the child-proof access screw. Plug the unit in and turn it on.