Free HealthE Newsletter

Path: Home>Shopping Center>Indoor Air Quality Products>HEPA Room Air Cleaners >Amaircare HEPA Room Air Cleaner Model 2500

The Amaircare Difference

• Completely sealed and gasketed air cleaner system.

• Metal housing construction with baked on powder coat finish.

• Largest HEPA filter surface area for all air cleaners of comparable air flow rates. This means long filter life and low replacement costs.

• Modular filters that allow you to add or change the level of gas and odor adsorption you desire. This provides for high performance and economical operation as you only replace the filters you need when needed.

• Optional odor adsorbing cartridge is located after the HEPA filter in the air stream to prevent particle clogging and provide maximum effectiveness and long life.

• All units in the assembly process are tested three times with a particle counter instrument that measures the number of particles in the out flowing air that are 0.3 microns and larger. This ensures that every air cleaner system sold meets or exceeds the HEPA efficiency standard for particle removal.

• Amaircare designs and manufactures all components except the German made energy efficient motors. They manufacture their HEPA filters "in-house" to assure they meet high quality standards. 

Outstanding Performance

Portable air cleaners available to the consumer use different technologies, filter components, fan systems and construction details. These variations in design have an impact on air cleaner performance and your health and safety. 90% of all particles in the air are smaller than 0.3 microns, the level at which HEPA filter efficiencies are measured. These particles stay suspended in the air, include allergens, viruses and bacteria and can be the most troublesome, especially for persons suffering from allergies and asthma. It is very important to have a high performance air cleaner that can provide clean air in your home.  For a complete review of what is important in selecting an Air Cleaner, please review our Important Features for Portable Air Cleaner Systems information.

Many companies use a HEPA filter and claim to have HEPA performance. These claims are based on the theoretical efficiency of the HEPA filter material and not the clean air produced by the air cleaner. Other Air cleaners use the word HEPA in their product descriptions or "HEPA-type" filters, but the filter does not meet the industry standard definition of HEPA efficiency. Unfortunately, inferior design prevents most air cleaner systems from reaching true HEPA performance.

Amaircare air cleaners are individually tested to meet HEPA standards and beyond. This means that the complete air cleaner system will remove at least 99.97% of all particles as small as 0.3 microns (1/300th the size of a human hair or 0.000012 of an inch) that enter the air cleaner and are also 95% efficient at 0.1 microns.

Many manufacturers mislead the public about their clean air flow rate (cfm). The air delivery of many products can be over stated by 100%. The reason is that some manufacturers publish performance data on their fan motors based on a "free flow" rate. This means the maximum rate of flow possible and not in a unit with the filters installed. Air filters provide a substantial amount of air resistance and reduces the flow of any fan motor. Amaircare air cleaners provide flow rate performance data with air filters installed just as you would purchase the unit. This assures you will get the performance you expect with every Amaircare air cleaner system.

Lasting Performance

Many air cleaners start out with poor performance and rapidly decline with use. The reason is a combination of the air cleaning technology used and system design. Other HEPA type air cleaners start out with efficiency levels of 70-80%. These devices are not sealed and gasketed systems that keep the integrity of the HEPA filter performance. Many air systems that do have gaskets use foam based seals that shrink or become brittle over time. As the HEPA filter material gets loaded with particles, static pressure builds up behind the filter and it becomes harder for the air to move through the filter. As a result, air will move in the path of least resistance and will flow around the ungasketed or poorly gasketed HEPA filter to release incoming particles back into the room air.

Many filter systems may utilize electrostastic filters, electrically charged plates or a combination of ionization (charged particles) and charged filter media. As the trapped particles cover the charged filter media or plates, the electrostatic attractive force of the filter media or charged plates decreases because of the build-up of particles over them. As a result, charged particles escape these devices and cling to the walls of the room where they can build up or they may be inhaled by people and make it difficult to expel these charged particles from the lungs. These units need constant cleaning and maintenance and can release dangerous ozone into the air. For a complete review of various air cleaning technologies, please review our Air Cleaner Technology information.

Amaircare units, with their sealed construction and high efficient filter design, maintain their efficiency over time. In fact, Amaircare units improve efficiency with time because as the HEPA filter traps particles, the openings within the filter media get smaller and therefore will trap smaller particles. The sealed system design of the Amaircare product prevents filter bypass particle escape thereby gaining filter efficiency improvement. Amaircare units are Guaranteed to provide HEPA efficiency of 99.97% removal of particles 0.3 microns and larger in the air returning into the room from the air cleaner.

How It Works

Three Stage Filtration

1. First, an activated carbon mesh pre-filter traps large particle mass and helps with odors and gasses. This has the benefit of prolonging the life of the motor and filters that follow. Additionally, this filter reduces maintenance costs by having the ability to be changed separately from the other filters.

2. Second, a certified HEPA filter traps ultra small particles including bacteria, viruses, allergens and sub-micron size dust.

3. The final stage is an activated carbon mesh post-filter to further assist with gas and odor control. For significant gas and odor control, an optional Gas and Odor canister with activated carbon or an activated carbon and Zeolite mixture can be used.

Filtration Details

	The Amaircare 3 stage HEPA filtration process employs dedicated filters, specifically designed to remove different types and sizes of contaminants. The pre-filter removes larger particles and assists with gas and odor removal, the HEPA filter removes sub-micron particulates and the final filter further reduces odor and gasses.
	Stage 1 Activated Carbon Pre-Filter is 3/16" thick, 150% carbon impregnated, non woven, fire retardant, polyester filter media. This stage screens out large particles and provides some odor and gas adsorption. This stage extends the life of the HEPA filter by trapping larger particles.
	Stage 2 The Amaircare Air Cleaner Systems utilize true HEPA (High Efficiency Particulate Arresting) filter media and each finished filter is tested for the removal of 99.97% of all particulates down to 0.3 microns in size with a laser particle counter. HEPA filters also remove particles smaller than 0.3 microns and are 95% efficient at removing particles as small as 0.1 microns. Amaircare HEPA filters are made from borosilicate fibers, feature top and bottom seals, rigid construction and exceptionally large surface area for long-life and low operation costs.
Optional Gas & Odor Filter Cartridge	Stage 3 After all particulates are removed from Stage #1 and Stage #2, the final stage is dedicated to odor and gas removal through the process of adsorption. Standard model includes a 1/2" thick, non woven polyester Activated Carbon Inner Blanket that is 200% impregnated with carbon. These carbon impregnated mesh filters are larger and thicker than similar filters used by other manufacturers. Optional solid pelletized 100% Activated Carbon media drop-in cartridges are available for higher odor and gas adsorption requirements. See Gas and Odor Chart for gas & chemical pollutant removal.

Filtration Replacement Procedure

	Opening the Cabinet Turn the unit off and unplug it. Remove the child-proof access screw at the back near the top of the unit. Do not discard it as you will need it later. To remove the four buttons located around the top edge, press down on the top cover. At the same time, press against the perforated screen directly below a button. The button will pop out slightly. Pull the button out all the way. Repeat for all four buttons. Once all four buttons are out, remove the metal cover and lift off the rubber gasket.
	Pre-Filter Lift the complete filter cartridge assembly from the unit. Remove and discard the carbon pre-filter. Wrap the new pre-filter around the HEPA cartridge completely enclosing it. Peel off the adhesive strip backing and press the filter together to seal it. Put the filter cartridge back in the unit. HEPA Filter Remove and carefully discard the old HEPA cartridge. Insert a new HEPA cartridge, complete with new Pre-filter and Inner Blanket. Place a new O-ring seal in the outer groove in the top of the HEPA cartridge. If the O-ring appears too big, pinch it in several places until it fits in the groove.
	Inner Blanket Fold the ends of the old Inner Blanket in and remove it from the unit. Insert the new Inner Blanket inside the HEPA filter with the edges overlapped by at least one inch. Once it is in position, press the Inner Blanket tightly against the inner screen until the ends butt together. Optional Odor and V.O.C. Cartridge The V.O.C. Cartridge is used in place of the Inner Blanket. Carefully slide the V.O.C. Cartridge into the HEPA filter. Do not drop it as it is heavy and may damage the unit.
	Closing the Cabinet Replace the rubber gasket on top of the filter cartridge in the grooved area. Position the top cover on the unit with the child-proof access screw hole at the rear of the unit. Replace the buttons by applying firm pressure to the top cover to align the holes and insert the buttons. Replace the child-proof access screw. Plug the unit in and turn it on.

Replacement Filters

	Pre-Filters 3/16" thick, non woven polyester Activated Carbon impregnated pre-filters. Pre-filter recommended replacement is every 3-6 months. Can be vacuumed to lower replacement costs.
	Inner Filter Blankets 1/2" thick, non woven polyester Activated Carbon inner blankets. Inner blanket recommended replacement is every 6 months.
	HEPA Filter Cartridge 8" tall, true HEPA (High Efficiency Particulate Arresting) filter media. 50 square feet of surface area for long life. Largest surface area of any portable air cleaner in it's class. Each finished filter is tested for the removal of 99.97% of all particulates down to 0.3 microns in size with a laser particle counter. Amaircare HEPA filters are made from borosilicate fibers, feature top and bottom seals and rigid construction. Recommended replacement period is 2-5 years.
	Annual Replacement Kit 3 - 3/16" thick, non woven polyester Activated Carbon impregnated pre-filters. 2 - 1/2" thick, non woven polyester Activated Carbon inner blankets.
	Optional Gas and Odor V.O.C. Cartridge 8" Drop-in cartridges featuring 8 lbs. of solid pelletized 100% Activated Carbon gas and odor adsorbing media. Longer lasting odor and gas adsorption capability than carbon impregnated woven fabric filters. These drop-in odor and gas cartridges fit inside the HEPA filter and can be replaced independently of the HEPA filter allowing the user to change filters only when necessary for optimum odor removal and cost savings. Recommended filter replacement is 1 year or when gas and odor removal ability has noticeably diminished. See Gas and Odor Chart for gas & chemical pollutant removal.

Amaircare Warranty

The motor/fan in this Amaircare® product is warranted by Americair Corporation to the original retail purchaser for FIVE (5) YEARS from the date of purchase. All other components (except filters) are warranted for ONE (1) YEAR. Americair will repair or replace at its option the component(s) which upon inspection by an authorized Amaircare® dealer proves to have failed in normal use, due to defects in material or workmanship, or, at its option, to replace the unit. Proof of purchase and warranty validation required. Operations other than those recommended in the instruction manual or at voltages other than that specified on the unit, or any attempts by unauthorized personnel to service or modify the unit will void the warranty.

Specifications

• Electric Voltage: 115V, 60 Hz.

• Energy Consumption: 41 to 84 watts (low to high speed).

• Air Delivery Rates: 50 to 175 cfm (cubic feet per minute).

• Maximum Coverage Area: 650 sf. based on highest speed setting, 8 ft ceiling and 2 room air changes per hour.

• Pre-Filter: 3/16" thick, non woven polyester Activated Carbon impregnated pre-filter.

• HEPA Filter: High capacity pleat design has 50 square feet of filter area. Made from borosilicate fibers, feature top and bottom seals and rigid construction. 99.97% efficient at 0.3 microns. 99.5% efficient at 0.1microns.

• Filter Life:

  1. Pre-Filter - 3 to 6 months.

  2. HEPA Filter - 2 to 5 years.

  3. Gas and Odor Filters - Inner blanket - 6 months, optional drop-in pelletized media cartridge - 1 year.

• Fan Motor: German made, super efficient, backward curved, centrifugal low noise design. Maintenance free steel ball bearings. Thermally protected class "B" insulated motor, run tested for 50,000 hrs.

• Control: Variable speed dial.

• Casing Material: 24 gauge cold rolled steel.

• Finish: Powder coated baked enamel.

• Dimensions: Height 13.5" x width 16".

• Weight: Standard model - 15 lbs. With optional gas and odor canister - 23 lbs.

• Colors: Black, White, Sandstone.

• Warranty: 5 Years on unit including the motor/fan assembly, excluding filter elements.

• Safety Certification: Underwriters Laboratories (UL) and CSA.

• Place of Manufacture: Canada.

Features

• Completely sealed and gasketed HEPA air filtration system.

• All units are individually tested with a particle counter to ensure that every air cleaner system sold meets or exceeds the HEPA efficiency standard for particle removal.

• 24 gauge steel housing with powder coated baked enamel finish.

• 3 Stage Filter Assembly - pre-filter, HEPA filter and gas adsorption inner filter or optional gas and odor cartridge.

• 6 rubber feet for stable operation and light weight for easy mobility.

• 360° air intake through a perforated enclosure.

• Air exits lower level through 4 discharge areas for even, low velocity air movement.

• Variable speed control.

• Tested system air flow rates. 50 to 175 cfm. See Room Sizing Chart.

• Super-efficient, German made CSA and UL approved motor. 41 watts on lowest setting and 84 watts on highest setting.

• 120 volt, thermally protected, insulated Class B motor is designed for continuous operation and run tested for 50,000 hours.

• True HEPA filter has 50 square feet of surface area for long filter life and cost saving infrequent changes.

• Quality components and design for low noise level.

• Maintenance free except for filter changes.

• 16" wide, 13.5" high. Weight is 15 lbs. for standard unit and 23 lbs. with optional gas adsorption cartridge.

• Warranty is 5 years on the motor/fan and one year for all other components (except filters).

Amaircare 2500 HEPA Air Cleaner

Price: $339.00 -  Free Shipping in the Continental US!

Model 2500 Air Cleaner - BlackModel 2500 Air Cleaner - WhiteModel 2500 Air Cleaner - Sandstone
Quantity:

Replacement HEPA Filter

Price: $99.00

Annual Filter Kit

3 Pre-filters, 2 inner filters.

Price: $79.00

Model 2500 HEPA FilterModel 2500 Annual Filter Kit
Quantity:

Model 2500 Gas & Odor Cartridge Kit

100% Activated Carbon Cartridge, 3 Pre-filters.

Price: $129.00

Quantity: